Filter section:
- Bulk solid silo
- Cement storage
- Coil lines, Inspection lines
- Coil storage
- Coiling machines
- Container ports
- Conveyor belt
- Decapper
- Engineering
- Extruder
- Filling plant
- Final assembly
- Finishing, Slitting line, Winder
- Finishing, Slitting lines
- Flying saw
- Forge hammer
- Gantry cranes
- Hot objects
- Laboratory
- Packing
- Ports, docking systems
- Printing machine, banderoling machine, register control
- Quality assurance
- Railway, Transportation
- Research and Development
- Service, Commissioning, Research
- Skin pass level, degree of stretching, mass flow
- Slitting shears
- Steel billets
- Tube inspection lines
Filter task:
- Abrasion measurement
- Coating inspection
- Coating inspection of foam material
- Collision avoidance
- Color inspection
- Color mark detection
- Color measurement of salmon meat
- Control of shears
- Distance measurement
- Egg yolk color classification
- Fill level measurement
- Length measurement
- Measurement of impact energy
- Mobile velocity and length measurement
- PET preform inspection
- Position detection
- Positioning of containers in gantry cranes
- Presence check
- Print mark detection
- Sandwich counter
- Velocity Measurement
- Velocity measurement, Length measurement
Filter measured variable:
- Acceleration (VLM)
- Color (CR)
- Degree of stretching and Skin pass level (VLM)
- Diameter (LDM)
- Distance (LDM)
- Fill level (LDM)
- Impact energy (VLM)
- Length (LDM)
- Length (VLM)
- Position (CR)
- Position (LDM)
- Position (VLM)
- Position detection (CR)
- Presence (CR)
- Presence (LDM)
- Quantity (CR)
- Thickness (LDM)
- Velocity (VLM)
- Velocity 1 (LDM)
- Velocity 2 (LDM)
- Width (LDM)
Task:
Length measurement
Areas:
Steel billets
Measured Variables:
Length (LDM)
Length measurement
Areas:
Steel billets
Measured Variables:
Length (LDM)
Description:
Two laser distance measuring devices are used for length measurements of steel billets. The steel billets have a diameter of approx. 15 cm and can have a total length of between 10 m und 20 m. On the transport from the storage area to the furnace the billets are moved crossways between the two LDMs. This way the devices measure the distance to the abutting faces of the billets and send the results by PROFIBUS to a PLC, which then calculates the total length of the steel billet by using the previously known distance and the measured data. As the measurement is performed outdoors, the measuring devices have been integrated into additional protective cases. One of the two devices is to be installed directly before the entrance to the furnace. Due to the high temperatures in this area, the use of a water-cooled protective case was unavoidable.
Products: LDM41P and LDM42P, LDM41PN and LDM42PN
Two laser distance measuring devices are used for length measurements of steel billets. The steel billets have a diameter of approx. 15 cm and can have a total length of between 10 m und 20 m. On the transport from the storage area to the furnace the billets are moved crossways between the two LDMs. This way the devices measure the distance to the abutting faces of the billets and send the results by PROFIBUS to a PLC, which then calculates the total length of the steel billet by using the previously known distance and the measured data. As the measurement is performed outdoors, the measuring devices have been integrated into additional protective cases. One of the two devices is to be installed directly before the entrance to the furnace. Due to the high temperatures in this area, the use of a water-cooled protective case was unavoidable.
Products: LDM41P and LDM42P, LDM41PN and LDM42PN
